ROCBIRD JUNIOR 26/24 Kup on-line
WHEEL SIZE
26"/24"
FRAME
AL 6061-T6
FORK TRAVEL
130mm
FRAME TRAVEL
130mm
WEIGHT
14.5kg
Description

Is there anything more beautiful than passion, freedom, and endless trails? Maybe only sharing it with your family and friends!
Experience it all with our trail bikes for junior riders - crafted to spark adventure and exploration. Designed for young riders who love to ride anywhere and everywhere, these bikes inspire confidence, skill, and pure joy on every trail.

The smaller version of the Rocbird Junior, designed for the youngest riders, rolls on a 26"/24" mini-mullet setup. Intended for children approximately 130–145 cm tall, this bike delivers all the excitement of full-size enduro in a frame perfectly scaled for small riders.

With 130mm of rear travel optimized with a kid-specific tune and a lightweight, air-sprung X-Fusion Velvet fork providing 140 mm of front travel, young riders enjoy smooth, controlled suspension over technical terrain. Hydraulic Tektro brakes provide the proper stopping power scaled for smaller hands.

For 2026, the smaller Rocbird Junior comes in fresh, youth-inspired colorways - a smooth two-tone fade of Copper Orange and Light Orange or a vibrant Prism Blue and Light Blue combination, both with new playful graphics designed to match the energy of young riders.

This bike has all that is needed to stay calm and keep watching how your little devils grow.


MAIN FEATURES

  • 26"/24" mini-mullet wheel setup for youngest riders (130–145 cm)
  • 140mm/130 mm front/rear suspension travel
  • Lightweight X-Fusion Velvet fork
  • X-Fusion O2 Pro R rear shock with kid-specific tune
  • Microshift Advent Junior 9-speed drivetrain with 11–38T cassette
  • Tektro hydraulic brakes with short junior levers
  • Dartmoor Raptor rims with Kenda Amrak tires
  • X-Fusion Manic LC dropper post
Geometry for Coil or Air shock
Geometry for Coil or Air shock
Geometry for Coil or Air shock

The modern progressive geometry of the Rocbird allows for a bottomless feel at the end of the curve, accommodating both, spring and air shocks. Each type of shock has its advantages, so the choice depends on personal preference and how the rider prefers their suspension. We aim to accommodate Rider Your Way in all aspects.

Progressive suspension
Progressive suspension

The Rocbirds' high leverage ratio at the start of travel helps overcome friction, making the initial part of the ride smooth. Towards the end of the stroke, increased progression provides resistance against bottoming out, ensuring the bike can handle any challenges you encounter.

UDH compatibility
UDH compatibility

Rocbird frames are fully compatible with SRAM Universal Derailleur Hanger (UDH) and Eagle Transmission drivetrains.

Custom chainstay and downtube protection
Custom chainstay and downtube protection
Custom chainstay and downtube protection

Our custom bicycle frame protectors are made of thick thermoplastic elastomer material, providing excellent protection against scratches, dents, and impacts. The ribbed pattern design adds durability, and these protectors are specifically tailored to fit Rocbirds frames, offering maximum protection without sacrificing aesthetics.

Screw-in bottom bracket with ISCG adapter
Screw-in bottom bracket with ISCG adapter
Screw-in bottom bracket with ISCG adapter
Screw-in bottom bracket with ISCG adapter

All Rocbird frames use a screw-in bottom bracket type, as we believe it's the best type of BB for MTB frames, because of their durability and easier maintenance. Also, Rocbird frames, thanks to a special cut on the BB shell, can use a dedicated ISCG05 mount, which can be purchased separately. This allows riders to add a chain guide and bash guard, leaving the option open for personal preference.

Fully internal routing
Fully internal routing
Fully internal routing
Fully internal routing

Yes, we know that mechanics hate it, but we all want clean, nice-looking bikes. This feature makes all frames at least 10% more stylish.

High-end-bearings-on-all-pivots
Dartmoor_High-end-bearings-on-all-pivots
High-end bearings on all pivots

All bearings in our full suspension frames feature extra dedicated custom sealing for enhanced protection against dust, dirt, and moisture. Red Mobil grease provides effective lubrication over extended periods, ensuring minimal friction and optimal performance. MAX-type bearings provide over 30% more load capacity than caged bearings.

HOW TO CHOOSE THE PERFECT BIKE_FRAME SIZE
How to choose the perfect bike/frame size

Check out our quick guide on choosing the right frame size - it only takes a few minutes but guarantees endless fun on the trails!
 

👉🔗Pick your size 👈

Dartmoor_banners_Rocbirds
Dartmoor_banners_Rocbirds
Dartmoor_banners_Rocbirds
Dartmoor_banners_Rocbirds
Dartmoor_banners_Rocbirds
Dartmoor_banners_Rocbirds
Dartmoor_banners_Rocbirds
Dartmoor_banners_Rocbirds
Dartmoor_banners_Rocbirds
Dartmoor_banners_Rocbirds
Dartmoor_banners_Rocbirds
Dartmoor_banners_Rocbirds
Dartmoor_banners_Rocbirds

Specification

WHEEL SIZE

26"(front)/24"(rear)

FRAME

glossy Copper Orange/Light Orange or glossy Prism Blue/Light Blue, AL 6061-T6

FRAME SIZE

Small

FORK

X-Fusion Velvet RL2, travel 140mm, axle 15mm, 1.5 tapered

SHOCK

X-Fusion O2 Pro R, 185x55mm with kids tune

SHOCK HARDWARE

22.2x8mm/Trunnion

HEADSETS

Dartmoor Blink OEM

DERAILLEUR

Microshift Advent Junior RD-M6195S (Short Cage) 1x9

SHIFTER

Microshift Advent Trail Pro SL-M9295-R, 9–speed

BRAKES

Tektro HD-J2820, w/junior levers, rotors front/rear 180mm

CRANKSET

Prowheel Charm 2-pcs, 155mm

CHAINRING

30T, BCD 76mm

CASSETTE

Microshift CS-H093, 11-38T

CHAIN

KMC-9

PEDALS

Dartmoor Candy

RIMS

Dartmoor Raptor 26", 32H, F/V, tubeless ready
(front)/Dartmoor Raptor 24", 32H, F/V, tubeless ready (rear)

FRONT HUB

Dartmoor Reel 100x15mm, 32H

REAR HUB

Dartmoor Reel Boost 148x12mm, 32H, Shimano HG freehub

FRONT TIRE

Kenda Amrak 26x2.4, 30 TPI, Wire

REAR TIRE

Kenda Amrak 24x2.4, 30 TPI, Wire

HANDLEBAR

Dartmoor Tornado 680mm, Ø31.8mm

STEM

Dartmoor Viper, Ø31.8mm

GRIPS

Dartmoor Maze Lite

SADDLE

Dartmoor Trail Junior

SEATPOST

alu 6061, 30.9x300mm

COLOR

glossy Copper Orange/Light Orange or glossy Prism Blue/Light Blue

WEIGHT

14.5kg (w/o pedals)

Geometry
size reach (mm) stack (mm) ST (mm) TT (mm) eTT (mm) CS (mm) HT (mm) HT angle (°) eST angle (°) BB drop (mm) WB (mm) stand-over (mm) wheel size (") hub size headset type (S.H.I.S) BB type (mm) post diam. (mm) clamp diam. (mm) brake mount max. rotor size (mm)
26/24 (S) 370 565 331 - 472 399 100 66 78 6/-20 1059 610 26/24 148x12 IS42/IS52 BSA/Euro 73 30.9 34.9 PM 180 180
FAQ
Can I pre-order a bike/bike?

If you're interested in purchasing our products, we recommend contacting one of our distributors from this list: Dartmoor Distribution. If your country isn’t listed, feel free to email us at sales@dartmoor-bikes.com - we’re happy to help!

Can I run a fork with a different amount of travel?

Yes! Each frame has a recommended fork travel range, which you can find in the Geometry Chart under “Recommended Fork Travel.”

How to assemble Dartmoor bikes?

Our bikes are shipped 95% assembled in a single box. You'll just need to install the handlebar, seat post, and front wheel.

Do you offer bearing kits?

Yes! We provide bearing kits for all full-suspension frames in our lineup. These are available through your local dealer.

Can I run wider tires?

Each frame's maximum tire size is listed in the specification chart. Please refer to it for guidance.

Where can I find the torque specs?

A complete user manual, including all torque specs, is available for each frame. You can find it at the bottom of the product page in the Downloads section.

What size do I need?

Check our Size Guide If you're still unsure, the best way to find the perfect fit is to test the bike yourself!

HOW TO RIDE